For Paver Buddy with Axel Sleeve

To view assembly instructions for Paver Buddy with permanent axel, CLICK HERE

Step 1:

With pliers, pinch and remove one spring lock from axel. 

Step 2:

Slide one tire on axel all the way to the other spring lock.

Step 3:

Slide axel through axel sleeve.

Step 4:

Slide other tire on axel and place spring lock back on axel to secure tire.

Step 5:

Remove wire pin lock from center pivot point.

Step 6:

With foot pedal towards the back, align holes on main lever with the pivot point holes and reinsert wire lock pin.

Step 7:

Remove wire lock pin from end of main lever.

Step 8:

Insert tube with holes into main lever and reinsert wire lock pin to desired length.