Time to get the Paver Buddy working for you!

Step 1:

With pliers, pinch and remove spring locks from axle.

Step 2:

Slide tire on axle.

Step 3:

Place spring lock back on axle to secure tire

Step 4:

Repeat Steps 2 and 3 for other side.

Step 5:

Remove wire pin lock from center pivot point.

Step 6:

With foot pedal towards the back, align holes on main lever with the pivot point holes and reinsert wire lock pin.

Step 7:

Remove wire lock pin from end of main lever.

Step 8:

Insert tube with holes into main lever and reinsert wire lock pin to desired length.